Garage Epoxy Floors in Eagle, Idaho

Garage floor coatings in Eagle

Eagle is a city of about 30,300 people in Ada County, ten miles northwest of downtown Boise, along the Boise River and up into the foothills. It began with Eagle Island farms and dairies in the 1860s and 1870s, and for most of the 20th century it was a small farm town. Over the last few decades it has become one of the Treasure Valley’s most sought-after places to live, with large homes on big lots and in foothill subdivisions.

Large garages and show spaces

Eagle homes often have three-, four- or five-car garages, deep RV bays, and detached shops. Many owners use part of the garage as a gym, workshop or space to show off cars, boats or motorcycles. That changes what they want from a floor.

What Eagle homeowners ask about

• **Metallic and solid-color floors.** For show garages and finished spaces, metallic epoxy gives a polished, high-end look.
• **Flake floors with custom blends.** Color blends matched to cabinetry, trim or a home’s exterior.
• **UV-stable topcoats.** Large doors and foothill sun mean lots of UV on the floor.
• **Integrated storage.** Garages with cabinets and slatwall need careful coating around fixtures.

Metallic floors need flat slabs

Metallic epoxy flows and settles, so it shows every high and low spot in the concrete. We grind carefully and fill low spots before a metallic floor. Metallics also show scratches more than flake, so they are best for show spaces rather than daily work garages. See metallic floors.

Working around cabinets

If cabinets are already installed, we can coat under toe kicks where they are raised, or coat up to them. It is easiest to coat before cabinets go in. If you are planning a garage remodel, schedule the floor first.

Flood plain and moisture

Homes near the river in Eagle can sit on higher groundwater. Moisture testing is especially important here before coating.

Request a quote

Send your Eagle ZIP, the number of bays, and photos. Tell us how you use the space and whether you want a show finish or a working floor. Neighbors in Star and Garden City have their own pages.

Car lifts and heavy loads

Some Eagle garages have two- or four-post car lifts. Lift posts put heavy point loads on the slab, and the anchors must go into sound concrete. If you have a lift or plan one, tell us. We can coat around existing posts, or coat first and leave anchor locations ready for the installer. Rolling jacks and stands should go on pads to protect the topcoat.

Some newer Eagle garages have in-floor radiant heat. Coatings can go over heated slabs, but the heat should be off or turned down during installation and curing, per the product’s instructions. Tell us if your slab is heated.